|
| | 
For over 50 years G&W Tool has designed and
manufactured special service tools for the heavy truck repair
industry. We offer tools for Eaton Roadranger Transmissions,
Meritor Transmissions, Meritor Drive Axles, Spicer/Dana Drive Axles and others.
 |
G-248 YOKE
NUT SOCKET
►
Proto 1" Drive Impact Socket
for the 2-3/4"
Yoke Nut
►
O. D. turned down
to 3.812" for Yoke clearance
► Due to alteration of the O.D. of socket there
is no
warranty on this socket
|
$185.00 |
 |
SP-450 YOKE
PULLER
► Removal of End Yokes
► Clearance slots to clear u-joint cap retaining lugs
► Puller Bar is 8" long
x 1-7/8" Dia. (6" Bolt)
|
$159.00 |
 |
W-320
ADJUSTER WRENCH
► Works on any
axle with slotted side bearing nuts.
(Single or two speed)
|
$89.00 |
 |
W-400
SIDE BEARING
PULLER & DRIVER
SET
EATON
► 34DS, 38DS
► 380DS, 381DS
► 402DS, 404DS
ROCKWELL
► RD20145
► 4 Tough jobs on
several different
models in one easy to carry kit. The
Puller & Driver are cut back to back to
remove & install both large & small
bearings.
► Puller makes
quick easy work of
removing bearings.
► Eliminates time
spent repairing
damaged housings caused by using a
torch to remove bearings.
► No more carrying
heavy assembly to
press to install bearings.
► Handy
Organizer/Tote Tray included.
$599.00
|
 |
 |
W-400SQP
ROCKWELL SQ PLUG
► Use with W-400
Kit to remove and install side
bearings on SQ100 and SQHD models
► Supplied with
bolt that can be welded to W-
400 tote tray so plug can be organized with
your existing W-400 kit
|
$49.75 |
 |
W-400M
SIDE BEARING PULLER
►
Use with W-400 Kit to remove side bearings
on Mack 92 & 93 CRD flange halves
► Eliminate damage to expensive flanges
from using torch to remove bearings
|
$399.00 |
 |
W-400MP2
THICK FLANGE
PLUG
►
Use with W-400M to remove side bearings
on Mack 92 & 93 CRD "Thick" flange
halves
|
$49.75 |
 |
W-400X
SIDE BEARING PULLER
►
Use with W-400 Kit to remove side bearings
on Meritor MT-14X models
► Removes bearings from "Locker" and
"Non Locker" units
|
$299.00 |
|
Rockwell Differential Tools |
|
 |
W-1450
PINION PUSHER
►
Use 1/2" impact wrench to efficiently remove
pinion.
►
Eliminate damage to expensive pinions from
beating them out.
►
Use on Rockwell Models: xx145,
xx160,SSHD, SQ100, and MT-14X
|
$279.00 |
 |
W-1451
PINION BEARING DRIVER
► Use with maul to install pinion
bearings.
►
Use on Rockwell Models: xx145,
xx160,SSHD, SQ100, and MT-14X
|
$102.00 |
1 |
W-1452
PINION HOLDER
► Eliminate makeshift methods of holding
pinion
in case while completing pinion assembly.
►
Supplied with metric bolts to attach holder to
case.
►
Use on Rockwell Models: xx145,
xx160,SSHD, SQ100, and MT-14X |
$279.00 |
 |
W-1453
DRIVE GEAR HOLDER
► Eliminate makeshift methods of holding
pinion/drive gear while installing or removing
pinion nut.
►
Engage pins with drive gear and bolt tool to
case. Use 1" impact wrench to remove or
install pinion nut.
►
Use on Rockwell Models: xx145,
xx160,SSHD, SQ100, and MT-14X |
$279.00 |
|
K-9000
Rockwell Differential Kit
►
Everything you need to get the job done efficiently
► Any of the 4 tools in this kit can be purchased separately
Tools Included:
►
W-1450 Pinion Pusher
►
W-1451 Pinion Bearing Driver
►
W-1452 Pinion Holder
►
W-1453 Drive Gear Holder
|
Kit pricing
represents a 10% Discount from full retail prices of tools purchased
individually.
|
Kit Price
$845.00 |
- PHONE:
- 800-247-5882
CALL TO PLACE ORDER!! CALL
WITH ANY QUESTIONS!!
- 918-485-8888
- FAX:
- 918-485-8899
E-MAIL:
sales@gwtoolco.com
|
